Bauknecht CTDI K 940C NE Mode d'emploi télécharger pdf (Page 33)

Instructions for assembly

Minimum distance to adjacent walls

Opening dimensions

Cutout dimensions

Outer dimensions of the hob

Important:

There is a risk of breakage if the hob is canted or subjec-

ted to stress during installation!

Glue the sealing tape onto the corner of the supporting

edge of the worktop so that no silicone adhesive can be

pressed under the hob.

Place the hob into the worktop cut-out without any adhesi-

ve and align it. Use shims if necessary

Fill the gap between the hob and the worktop with heat-re-

sistant silicone adhesive.

Important

Silicone adhesive must not get under the support surface.

If this occurs it will not be possible to remove the hob again

at a later stage. No liability will be assumed in the case of

failure to observe these instructions.

880+1

min.50

560+1

580

900

2 4

min.50

880+1

min.50

560+1

584+1

904+1

min.50

196

150

85 x 465

4,5 -0,5

150

200

85 x 465

2.4 Variable installation possibilities:

Overlying installation

Dimensions in mm

2.5 Variable installation possibilities:

Flush installation

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 131 132

Commentaires sur ces manuels

Pas de commentaire

Bauknecht CTDI K 940C NE Mode d'emploi Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Bauknecht CTDI K 940C NE